Zeroing Hack: Get a brightly colored line of string or yarn and tie one end to a reasonably heavy object, like that old mil-spec stock you have lying around. There are several affordable tools available, from bubble levels to shims, that can eliminate this potential trouble as you mount your scope to the rifle. Zeroing a scope that behaves that way will make you shake your fist at the heavens, but it’s easy to avoid. Windage adjustments will inadvertently bring the point of impact slightly up in one direction, then down again in the opposite direction.Įlevation adjustments will slightly affect the point of impact left and right. A canted scope will cause your adjustments later to get very complicated. You also need to ensure that the scope is vertically true and not “canted” or tilted left or right. If a major problem with the scope’s location is preventing this, you may have to research purchasing new rings or a different mount entirely. You want a clear view through the optic from edge to edge, with no “shadows” dancing around while you are in a comfortable firing position behind the rifle. If the scope has an adjustable ocular, use it to make the scope’s reticle as sharp as possible for your eyes. If you are tilting your head or straining your neck to look through the scope, adjust its position in the mount. Shooting from the prone position tends to place your head further forward on the stock than shooting while sitting or upright, so some compromising may be involved for a rifle that will be shot from multiple positions. Make sure the scope’s position is correct in relation to the placement of your eye when you take up a firing position. Unless you need to check for fitment issues with a bolt action rifle, just leave the bolt carrier group out of the rifle entirely to ensure safety. Be safe-make sure your rifle is unloaded, don’t even leave any ammunition lying around your work area at all. When mounting your scope, take your time and do it right. Scope University is in session, we’re going to teach you to zero like a hero! How to Zero a Scope – PreparationĪ successful sight-in session starts at home, not at the range. Depending on your approach, your equipment, and your expectations, zeroing can either be a satisfying or terribly frustrating experience. It’s time to align the bullet’s point of impact with the point of aim through that sweet new scope-a process called “zeroing” the rifle. The day has finally come! The new scope you’ve been wanting has finally arrived! This thing is going to be awesome on your favorite rifle! In a flurry of Allen wrenches, squinting eyes, and just a bit of thread locker spilled on the kitchen table, the optic is mounted up and your new rifle configuration is ready to hit the range.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |